Find the right solution.

AirGen RBL is a liquid foaming admixture for producing lightweight, thermally insulating concrete and cement mixes. It introduces air after foam generation with suitable equipment.

The Green Build Egypt anti-carbonation system is presented through three components: TexPrime AC primer, GPutty C fairing and leveling putty, and TexLastic protective coating.

BituProof S is a cold applied, solvent based bitumen coating for waterproofing and sealing concrete and masonry surfaces.

BlockTherm is an acrylic protective coating that reflects solar heat and provides thermal and water protection for exposed building surfaces.

Brick Bond is an admixture for brick and block laying mortar. It helps retain mixing water and improve adhesion between masonry units.

Crackless Fiber is a natural fiber for concrete and cementitious mixes, used as secondary reinforcement to help control cracking without greatly affecting workability.

Crackless Fiber GS is a synthetic glass monofilament for plaster, concrete and cement mortar, intended to improve mechanical properties and reduce cracking.

Crackless Fiber PP is a polypropylene monofilament for concrete and cement mixes, used as secondary reinforcement to help reduce cracking.

Densil is a water based densifier and surface hardener for cured concrete floors, intended to strengthen the surface and resist water while allowing vapor movement.

FastBrick is an early strength concrete admixture for precast bricks, blocks, paving units and other cast cement products, supporting faster production and handling.

FastCrete is a water based, fast setting admixture for semi dry cement mixes used to make bricks, tiles and interlocking paving units.

Fastcrete TH is a chloride free, water based admixture for faster setting of concrete and cement mixes, including precast bricks, tiles and interlocking paving units.

Flow Crete P is a water soluble powder superplasticizer for concrete and cement mixes. It reduces mixing water and supports early strength in cement products.

Flow Floor is a polymer modified, cement based self leveling compound for smoothing uneven floors before parquet, carpet and other floor coverings.

FlowCrete is an admixture for concrete and cementitious mixes. Its stated uses include reducing mixing water, supporting early strength development and producing interlocking paving units.

FlowCrete D2000 is a water reducing, retarding plasticizer for ready mix concrete transported over longer distances, helping retain workability with controlled setting.

FlowCrete F is a high-performance concrete admixture intended to increase flowability and support admixture re-dosing in concrete trucks.

FlowCrete FE is a Type F concrete admixture for ready mix delivered over short distances. It can also be used for re dosing without excessive retardation.

FlowCrete FW is a water based admixture that reduces mixing water and supports early strength in concrete and cement products such as bricks, tiles and interlocking pavers.

FlowCrete G300 is a Type G ready mix concrete admixture for workability retention and controlled setting delay during transport over longer distances.

FlowCrete G360 is a Type G superplasticizing admixture for ready mix concrete, combining workability retention with controlled setting delay on long journeys.

FlowCrete HP is a Type F concrete admixture for precast production, designed to increase flowability without a retarding component.

FlowCrete HP-FS is a chloride free accelerating and superplasticizing admixture for precast concrete, intended to speed setting, hardening and production cycles.

FlowCrete WP is a water based waterproofing admixture that reduces porosity in concrete and cement mixes, particularly for structures containing water.

GB AddiPlug is a fast setting, waterproofing mortar additive for plugging active water leaks in concrete structures and basements.

GB Cryl S is a fast drying acrylic protective coating for concrete, steel and other building surfaces exposed to weather.

GB Cryl WB is a single component, water based acrylic coating for waterproofing and protecting exposed concrete against weather, water and abrasion.

GB Fill N is a polymer modified joint filling mortar for ceramic, porcelain and natural stone tiles, designed to resist water and weather exposure.

GB Fill W is a waterproofing mortar for joints between natural stone, marble, granite and tiles, intended to limit water ingress through the joints.

GB Fix CE is a cement based fixing mortar for ceramic, porcelain and natural stone tiles on interior walls and floors, including low absorption tiles.

GB Frow is a water based concrete form release agent for easier separation of concrete from formwork, helping reduce surface air holes and avoiding flammable oil based products.

GB Guard is a clear silicone treatment for natural stone facades and cladding, providing water protection without changing their natural appearance.

GB Rep is a polymer modified, fiber reinforced cement repair mortar for leveling and repairing concrete and other cementitious surfaces in thicker layers.

GB Rock CE is a dry shake surface hardener for newly placed concrete floors, forming an abrasion resistant, smooth finish integrated with the concrete.

GB Seal is a water based, penetrating polymer sealer and primer for concrete and masonry, limiting moisture passage while allowing later finishing layers to adhere.

GBCure WB is a water based polymer curing compound for concrete and cement surfaces, limiting water loss without a wax layer that obstructs later coatings.

GBFix is a fixing mortar for ceramic, porcelain and natural stone tiles, designed for exterior applications exposed to water and weather.

GBFix CF is a flexible tile fixing mortar for marble, porcelain and natural stone, designed to resist water, weather and thermal movement.

GBFix RP is a ready to use acrylic adhesive mortar for ceramic, porcelain, marble and other natural stones in interior and exterior applications.

GBFloor P is a water based polymer curing compound and surface hardener for concrete floors. It limits moisture loss without forming a waxy layer that separates later coatings.

-Superplasticizing, Expanding Admixture for cement mixtures and concrete

GBGrout CNS is a high strength, flowable, non shrink cementitious grout for filling beneath machine base plates, columns and structural units.

GBGrout MC is a fiber reinforced, non shrink cementitious micro concrete for structural filling and repair where a high strength, flowable mix is needed.

GBond AR is an acrylic modifier for cement mortars, plasters and slurries, used to improve bonding, flexibility and water resistance.

GBond LA is an SBR latex admixture and bonding agent for mortar and concrete, used to improve adhesion, flexibility and water resistance.

GBRock is a dry shake hardener for newly placed concrete floors, providing a smooth surface with resistance to abrasion and friction.

GProof is an acrylic modified, cementitious waterproofing system for concrete, brick and masonry surfaces, providing a protective barrier against water leakage.

GProof ELA is a flexible, acrylic modified waterproofing system for concrete, brick and masonry surfaces, intended to bridge surface cracks.

GPutty C is a polymer-modified, cement-based fairing and leveling putty for concrete and brick walls. It is a single-component material mixed with water.

HiRep is a fiber reinforced, polymer modified cement repair mortar for repairing and leveling concrete and cementitious surfaces in substantial thicknesses.

HydroProof is a water based bitumen emulsion for general waterproofing of concrete and masonry, forming a barrier against water after drying.

HydroProof RB is an acrylic modified, rubberized water based bitumen emulsion for waterproofing concrete and masonry exposed to standing water.

Nano-Cure is a water based nano polymer curing compound for concrete that limits moisture loss without a plastic or waxy film that could separate later coatings.

Plaster Magic is an admixture for cement plaster mortar that improves workability, leveling and surface finish, including mortar applied by plaster spraying machines.

Acrylic Resin-Based, Water-Based Emulsion, Soil Stabilizer

STAB SS is a water based resin emulsion for binding and stabilizing loose soil and sand in site and other ground applications.

Styromortar is an adhesive mortar for foam boards used in thermal insulation, also providing a protective covering against weather and mechanical damage.

TexLastic is a single component, elastomeric acrylic coating for waterproofing concrete and protecting it from weather and carbon dioxide diffusion.

TexLastic Plus is a fast drying, elastomeric acrylic coating for exposed concrete, providing waterproofing, weather protection and resistance to carbon dioxide ingress.

Tile Glue is an admixture added to conventional cement mortar for fixing ceramic tiles and mosaics, converting it into a tile adhesive mix.

UltraBrick is a water based admixture for brick, block and interlocking paving production, designed to support earlier strength and faster handling of cement units.

UltraCrete PC 100 is a polycarboxylate based admixture for precast concrete, designed to improve flowability and support faster demoulding of cast units.

UltraGrout-EP is a flowable epoxy structural grout for filling under machine base plates, providing compressive strength and resistance to impact and chemicals.

UltraLastic is a clear, low viscosity, solvent free epoxy for adhesives and stickers that remains elastic after curing.

UltraLastic SB is a flexible, two part epoxy protective coating for waterproofing and protecting concrete and other suitable surfaces.

UltraPoxy is a solvent free epoxy coating for concrete floors, used to create a protective finish resistant to abrasion and chemicals.

High-penetration epoxy primer for various applications.

UltraPoxy AN is a two part epoxy anchoring mortar for structural repair and fixing reinforcement or anchors in concrete, with high bond strength.

UltraPoxy CRep is a semi fluid, two part epoxy cement mortar for structural concrete repair and bonding, with resistance to impact and chemicals.

Our Epoxy is 100 % solid content, no VOC materials added.

UltraPoxy HP is a solvent free, high build epoxy coating for concrete floors, providing a semi gloss finish with abrasion and chemical resistance.

UltraPoxy LV is a low viscosity, penetrating epoxy for structural repair of fine concrete cracks and protection of concrete surfaces.

UltraPoxy LV-CC is a clear, low viscosity, solvent free epoxy resin for casting and decorative work, including wood tables.

UltraPoxy Primer is a low viscosity epoxy primer that penetrates concrete and other substrates before application of epoxy floor coatings.

UltraPoxy SB is a solvent based epoxy coating for steel and other metals, used to protect against corrosion and wear.

UltraPoxy SC-E is a solvent free epoxy protective coating for steel and metal surfaces, with abrasion and chemical resistance.

UltraPoxy SC-S is a multipurpose epoxy protective coating for surfaces requiring resistance to abrasion and chemical exposure.

UltraPoxy SL is a self leveling epoxy floor covering for floors and wood, forming a seamless surface with abrasion and chemical resistance.

UltraPoxy ST 500 is an epoxy screed mortar for seamless industrial floors that need impact, wear and abrasion resistance.

UltraPoxy T is an epoxy tile adhesive for fixing tiles where strong bonding and chemical resistance are required.

UltraPoxy ZP is a two part, amine cured epoxy primer and coating rich in zinc phosphate for corrosion protection of steel.

UltraPoxy ZR is a two part, zinc rich epoxy primer and protective coating for steel surfaces exposed to corrosion.

UltraThane is an aliphatic polyurethane finishing coat for steel, concrete and foam, designed for color stability and protection from weather and UV exposure.