Additives in Egypt.

AirGen RBL is a liquid foaming admixture for producing lightweight, thermally insulating concrete and cement mixes. It introduces air after foam generation with suitable equipment.

Brick Bond is an admixture for brick and block laying mortar. It helps retain mixing water and improve adhesion between masonry units.

FastBrick is an early strength concrete admixture for precast bricks, blocks, paving units and other cast cement products, supporting faster production and handling.

FastCrete is a water based, fast setting admixture for semi dry cement mixes used to make bricks, tiles and interlocking paving units.

Fastcrete TH is a chloride free, water based admixture for faster setting of concrete and cement mixes, including precast bricks, tiles and interlocking paving units.

Flow Crete P is a water soluble powder superplasticizer for concrete and cement mixes. It reduces mixing water and supports early strength in cement products.

FlowCrete is an admixture for concrete and cementitious mixes. Its stated uses include reducing mixing water, supporting early strength development and producing interlocking paving units.

FlowCrete D2000 is a water reducing, retarding plasticizer for ready mix concrete transported over longer distances, helping retain workability with controlled setting.

FlowCrete F is a high-performance concrete admixture intended to increase flowability and support admixture re-dosing in concrete trucks.

FlowCrete FE is a Type F concrete admixture for ready mix delivered over short distances. It can also be used for re dosing without excessive retardation.

FlowCrete FW is a water based admixture that reduces mixing water and supports early strength in concrete and cement products such as bricks, tiles and interlocking pavers.

FlowCrete G300 is a Type G ready mix concrete admixture for workability retention and controlled setting delay during transport over longer distances.

FlowCrete G360 is a Type G superplasticizing admixture for ready mix concrete, combining workability retention with controlled setting delay on long journeys.

FlowCrete HP is a Type F concrete admixture for precast production, designed to increase flowability without a retarding component.

FlowCrete HP-FS is a chloride free accelerating and superplasticizing admixture for precast concrete, intended to speed setting, hardening and production cycles.

FlowCrete WP is a water based waterproofing admixture that reduces porosity in concrete and cement mixes, particularly for structures containing water.

Plaster Magic is an admixture for cement plaster mortar that improves workability, leveling and surface finish, including mortar applied by plaster spraying machines.

Tile Glue is an admixture added to conventional cement mortar for fixing ceramic tiles and mosaics, converting it into a tile adhesive mix.

UltraBrick is a water based admixture for brick, block and interlocking paving production, designed to support earlier strength and faster handling of cement units.

UltraCrete PC 100 is a polycarboxylate based admixture for precast concrete, designed to improve flowability and support faster demoulding of cast units.